Category Archives: AV (Audio-Video)

Connect to Sony MDR-XB950BT Headphont via Bluetooth

xb950btblack1-1200

Connect to Sony XB950BT Headphone via Bluetooth

  1. Place the Bluetooth device (iPhone, laptop…) within 1 meter (3 feet) of the Headphone.
  2. Enter pairing mode on the Headphone. Press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button.
  3. Perform the pairing procedure on the Bluetooth device (iPhone…) to detect the Headphone. When the list of detected devices appears on the display of the Bluetooth device, select “MDR-XB950BT.” If passkey input is required on the display of the Bluetooth device, input “0000”
  4. Make the Bluetooth connection from the Bluetooth device.

 

Led indicators

  1. : Turns on in blue
  2. : Turns on in red
  3. – : Turns off

 

  1. Pairing mode    ○  ○
  2. Connectable      ○ – – ○ – – ○ – – ○ – – ○ – – ○ – – ○ – – ○…
  3. Connecting        ○ ○ – ○ ○ – ○ ○ – ○ ○ – ○ ○ – ○ ○ – ○ ○…
  4. Connected (HFP/HSP or A2DP) ○ – – – – – – – – – ○ – – – – – – – – -…
  5. Connected (HFP/HSP and A2DP) ○ – ○ – – – – – – – ○ – ○ – – – – – – -…
  6. Playing music or during a call (HFP/HSP or A2DP) ○ ○ – – – – – – – – ○ ○ – – – – – – – -…
  7. Playing music or during a call (HFP/HSP and A2DP) ○ ○ ○ – – – – – – – ○ ○ ○ – – – – – – -…
  8. Incoming call ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○…

Hint: when the remaining battery charge becomes low, the indicator turns from blue to red, except for pairing mode.

 

Checking the remaining battery

When you turn on the headset by pressing the POWER button, the indicator (red) flashes. You can check the remaining battery charge by the number of times the indicator (red) flashes.

You can also check the remaining battery charge when the headset is turned on. Pressing the POWER button will cause the indicator to flash and show the remaining battery charge.

  • 3 times: High
  • 2 times: Medium
  • 1 time: Low (needs to charge)

When the battery is almost empty The indicator turns red. When the battery becomes empty, the headset sounds a warning beep and turns off automatically.

 

Reset headphone

1. Soft reset the headset:

If the headset cannot be turned on, or if it cannot be operated even when it is turned on, set the headset in charging status, then press the POWER and BASS BOOST buttons simultaneously. The headset is reset and turns off.

2. Hard reset the headset (to factory default):

Turn off the headset, then press and hold the POWER and PLAY/CALL buttons simultaneously for more than 7 seconds. The indicator (blue) flashes 4 times, and the headset is reset to the factory settings. All pairing information is deleted.

Advertisements